Scan-Speak D2905/970000 'Classic'
28 mm textile‑dome tweeter.
The Scan‑Speak D2905/970000 uses a lightweight textile dome diaphragm. This design provides a wide operating range and stable behaviour at high frequencies. The suspension has low mechanical losses and a stiffness chosen to set the resonance frequency and keep losses low within the operating band.
The driver incorporates the Symmetrical Drive SD‑2 system, which reduces inductance variation during voice‑coil displacement and lowers distortion related to magnetic‑field non‑uniformity. The rear chamber has a low resonance and provides acoustic damping, improving performance near the lower end of the operating range.
The black‑painted aluminium faceplate provides a rigid mounting surface. The lightweight two‑layer voice coil and the spider define the dome position and its motion during operation.
- Nominal impedance [Zn]: 6 Ω
- Recommended frequency range: 2.5…20 kHz
- Resonance frequency [fs]: 500 Hz
- Sensitivity [2.83 V⁄1m]: 89.5 dB
See also:
Scan-Speak D2905/970000 - information in PDF format (345 Kb)
Manufactured by: Scan-Speak ♦ Model: D2905/970000 ♦ Origin: DENMARK ♦ Shipping Weight: 1 kg
You might also be interested in:
High sensitivity woofer with coated NRSC fibre glass cone.
Midwoofer with sliced paper cone, SD-1 motor and Low loss linear suspension.
Tweeter with 1″ textile dome diaphragm, SD-2 motor and large wave guide front.
Tweeter with 1″ aluminium dome diaphragm.
Midwoofer with 8-ohm voice coil and aluminium cone.
Midwoofer with carbon fibre⁄paper cone.
Classic tweeter with 1″ soft dome and ferro fluid.
Woofer with hard carbon-paper cone, SD-1 motor and low loss suspension.
(*) Prices are per unit, excluding Value Added Tax









